Carefree Satin Emulsion Floor Polish

Carefree Satin Emulsion Floor Polish 

Carefree Satin is a great choice for bringing out the natural beauty of
your floor where shine is not required. The low gloss finish reduces the
visible effects of traffic marks and scuffs that quickly ruin high gloss
floor finishes. Safe to use on thermoplastic, vinyl, rubber, stone and
composite floors with outstanding results on linoleum. It may also be
used on sealed wood and cork floors.

Traffic resistant
Carefree Satin is formulated from an optimal blend of polymers, waxes
and resins to provide a durable and outstanding hard finish. With
strong resistance to marking and scuffing as well as a low gloss finish,
the dynamic combination reduces the need for floor maintenance.
This ultra low maintenance saves labour by as much as 50%.

Long lasting smooth finish
Easy to apply and quick to dry, Carefree Satin gives a consistent long
lasting smooth finish on a wide range of floors. Simply dust mop or
damp mop for easy maintenance.

Usage instructions
Each 5 litres of Carefree Satin polishes up to 500m².

Step One: Prepare the floor
Prepare the floor by stripping with Carefree Speed Stripper
(not suitable for wood floors) or Carefree Stripper. Ensure slurry
is removed and the floor is thoroughly clean and dry.

Step Two: Protect the floor
Leaving a six inch gap from the wall, apply a thin even coat of
Carefree Satin using a figure of 8 motion with a clean mop or
applicator. Allow to dry thoroughly (approximately 30 minutes).
Apply second and where necessary subsequent coats at 90° to the
preceding coat. Allow each coat to fully dry before re-application.
On the final coat, apply the polish up to the skirting board.

Step Three: Maintain the floor
Regularly maintain the floor by damp mopping, machine
scrubbing or spray cleaning. The ideal maintenance product
to use is Carefree Maintainer.